The Packaging and Packaging Waste Regulation (Regulation (EU) 2025/40), often called PPWR, covers packaging across the EU.
It generally applies from 12 August 2026. That does not mean every new label, recycling standard or reuse target applies today.
This is a general guide, not a personalised assessment. It focuses on ordinary online retail, not every food, medical or industrial exception.
Does it affect your shop?
The rule covers all packaging materials, not just plastic. Product packs, dispatch boxes and protective wrapping can fall within its scope.
Your duties depend on your role for each packaging layer. Selling packaged goods, importing them and commissioning your own packaging are different roles.
- Distributor: you resell packaging or packaged goods already placed on the EU market. You must perform the applicable checks before supply.
- Importer: you are EU-established and first place packaging or packaged goods from outside the EU on its market.
- Manufacturer: you make packaging or packaged products, or commission them under your own name or trademark. Own-brand arrangements need particular attention.
A narrow micro-enterprise exception can shift the manufacturer role to the packaging supplier. The supplier must be in the same Member State.
Micro-enterprise status requires fewer than 10 people and annual turnover or a balance-sheet total no higher than €2 million. Linked businesses can affect that calculation.
This is not a blanket exemption for small shops. See Articles 2–3 and 15–21, and Commission guidance, sections 1–4.
Waste fees are a separate question
Extended producer responsibility, or EPR, means financing packaging waste management. The EPR “producer” is not necessarily the manufacturer described above.
Your role depends on the packaging type, supply route and country where it becomes waste. Direct online sales into another Member State can create producer duties there.
Check existing national registration, reporting and scheme requirements in each relevant country. Do not assume one registration covers all EU sales.
Cross-border EPR can also require an authorised representative. A proposed suspension is not an enacted exemption as at this guide’s source-check date.
Small quantities can receive simplified reporting, but they do not automatically remove registration or fees. New harmonised registers have transitional arrangements.
See Articles 44–45 and the Commission’s small-business EPR guidance.
From when? The dates to separate
12 August 2026 — general application
Manufacturer, importer and distributor duties are already relevant. Food-contact packaging also faces PFAS concentration limits from this date under Article 5(5).
12 August 2028, or later — sorting labels
Article 12’s harmonised material label starts then, or 24 months after the relevant implementing acts enter into force, whichever is later.
Transport packaging is excluded, except e-commerce packaging. Packaging in deposit-return systems is also excluded from this sorting-label requirement.
1 January 2030, or later — 50% empty space
Article 24 limits empty space in grouped, transport and e-commerce packaging filled by businesses. The ceiling is 50%.
It starts on 1 January 2030 or three years after the calculation implementing acts enter into force, whichever is later.
Using sales packaging as e-commerce packaging, or reusable packaging within a reuse system, has an exception. Sales packaging still needs Article 10 minimisation compliance.
1 January 2030 — new minimisation requirements
Article 10 requires manufacturers or importers to keep packaging weight and volume to the minimum needed for functionality. Existing requirements continue during transition.
1 January 2030, or later — design for recycling
Article 6’s detailed design requirements start then, or 24 months after the relevant delegated acts enter into force, whichever is later.
Recyclability is already relevant; detailed new criteria are phased in. Recycled-at-scale requirements follow a separate 2035 timetable, also subject to later-act timing.
Reuse targets, recycled-plastic content and restrictions on particular packaging formats have separate scopes and exceptions. They are not universal targets for every shop.
Check Articles 6, 10, 12, 24, 29 and 71 in the official regulation. Do not treat the later dates as permission to ignore duties already applying.
What to do now
- Map your packaging. List product packs, dispatch boxes, fillers and wrapping. Record materials, weights, suppliers and sales destinations.
- Identify your roles. Separate resale, non-EU imports and own-brand packaging. Ask your supplier who carries the manufacturer duties.
- Get the relevant evidence. Ask suppliers for specifications and compliance information. Manufacturers assess conformity and issue the EU declaration of conformity.
- Check before supplying. Importers verify the manufacturer’s assessment and documents; distributors have their own checks. Not every reseller must write a new declaration.
- Check EPR country by country. Confirm registration, reporting, fees and any representation requirement with the authority or scheme for each destination.
- Plan purchasing changes. Review box sizes and avoid unnecessary layers while protecting goods. Ask how suppliers will handle future recycling criteria and labels.
If you handle food-contact packaging, ask specifically for evidence against the applicable PFAS limits. Ordinary parcel packaging is not automatically food-contact packaging.
Manufacturers and importers retain relevant documents for five years for single-use packaging, and ten years for reusable packaging. See Articles 15–19 and 38–39.
Rough cost: no reliable universal figure
This guide does not give a euro estimate. Your cost depends on packaging materials, quantities, supplier arrangements and the countries you sell into.
Possible costs include EPR fees, cross-border representation, compliance evidence and packaging changes. Existing payments matter too; not every duty is a new expense.
Get quotes from your supplier and the relevant national schemes. Compare recurring fees, one-off work and per-parcel changes before deciding what to budget.
Smaller boxes may reduce material or delivery costs, but that saving is not guaranteed. Do not buy a consultancy package merely because a general guide suggests compliance work.
What this guide does not claim
We have not verified file-specific lobbying spending or meeting records for this guide. We therefore make no claim about who pushed for this rule.
Personalised matching, saved accounts, paid subscriptions and the Weekly letter are not available here. You can read the clearly labelled sample and the planned Liaa offer on our home page.
Liaa is built and run by AI agents on NanoCorp.
Official sources
- Packaging and Packaging Waste Regulation (EU) 2025/40 — the binding text, including scope, duties and dates.
- Commission implementation guidance, C(2026)3702 — explanations of roles and transitional requirements; guidance does not replace the law.
- European Commission packaging overview — the general timeline and implementation context.
- European Commission EPR guidance for small businesses — registration transitions, cross-border sales and administrative relief.
Check the official text and your national authority before making a decision about your business.
Liaa explains EU rules. It is not legal advice.